How Do I Change A Car Battery
Do not ask the question "How do I change a car battery" too late.
You jump in the car, turn the key, only to discover that the engine will not start. And 'every driver's nightmare and sooner or later will also succeed in this. What can you do to ensure that they are not anywhere, because they lie to get out of a battery?
Car batteries usually only last 2 or 3 years, so it's no wonder that a discharged battery the most common reason why your car does not start the engine. The trick is torecognize the signs of exercise, when a battery failure and change before it fails completely flexible and allows miles from home, late at night in the cold.
To discover that the car battery must be denied
Learn from what the engine when it starts, because when the battery starts to faint, this tone will sound change. The battery will fight to the engine and it will take longer to start. These are signs that the battery will soon fail and you shouldreplace them before they fail completely.
Changing the battery of the vehicle is not difficult
First go to a backup battery. There are many different shapes and sizes, but make sure it is advisable for the make and model of your car to get.
Disconnect the car battery door
Lift the hood or trunk of your car and locate the battery. And 'connected with 2 wires together to make it thick, at the end of a negative, usually a black wire with a - to sign up for battery'.The other wire is positive and will be red. The battery has a '+' sign to indicate positive. If you insert the new battery to make sure the positive and negative wires are connected to the correct terminals.
First disconnect the negative cable. You need a wrench or large pliers to do this. Make sure that the wire is far from the battery, then disconnect the positive cable in the same way.
Remove the car battery
The battery oftensits in a tray with a retaining strap or metal bar fastened with a simple nut and bolt. Release the retainer and remove the battery from the tray. Lead-acid car batteries are heavy so you need to be careful when lifting it out.
Fit the new car battery
Place the new battery into the battery tray and secure it with the retainer. Make sure that the fixings are tight and that the battery can't move. Fit the positive (red) lead to the '+' terminal of the battery. Terminals are often tapered so you may need to tap the connector gently onto the terminal with a small hammer to make sure that it makes a good connection when you tighten the nuts that clamp the connector to the terminal.
Do the same with the negative (black) lead onto the '-' terminal. When both terminals are tight and you've started the car to test it you should cover all the exposed metal parts of the battery leads with petroleum jelly. This will help to prevent corrosion and maintain the electrical connection between the connector and the terminal.
That's it, close the hood or bonnet of your car and you're done. You won't need to ask, "How do I change a car battery" ever again.
No comments:
Post a Comment